DEFINITIONIt is a cement-based ecological insulation plaster that provides heat, sound and water insulation on terraces.

APPLICATION AREAS

It is used in areas where heat, sound and water insulation is desired on terrace surfaces.

APPLICATION
Make sure that the ambient temperature is between +5 °C and +35 °C during application. Do not apply on surfaces that are frozen, melting or in danger of freezing within 24 hours. Do not apply under direct sun or strong wind.

9 kg.Fixser Terrace Insulation Plaster 8-Pour into 9 liters of clean water and mix with a low speed mixer Mix until a homogeneous mixture without lumps is obtained. Allow the mortar to rest for 5 minutes and mix again for 1 minute. 0.5 - 3 cm. thick . Fast and easy to apply. It can be applied on old concrete floors after applying floor primer. When the surface sets , it is corrected with mechanical finishing.

WARNINGS
No material (lime, cement, gypsum, etc.) should be added to the prepared mortar. Expired mortars should not be mixed with water or dry mortar and used again. Do not apply on very hot or frozen surfaces exposed to the sun for a long time. Do not exceed the specified application surface and instructions for use. Do not inhale, in case of eye contact, rinse with plenty of water and consult a doctor if necessary. Since it is a cement based material, gloves should be worn during application. The packaged product should not be stored in humid environments.

CONSUMPTION8 kg /m² (for 1 cm thickness )

HEALTH and SAFETY

Avoidskin and eye contact. Gloves must be worn during storage and application.