DEFINITIONCement based, polymer added, Flex Ceramic Adhesive Mortar with high adhesion strength.

APPLICATION AREAS

Ceramic on horizontal and vertical surfaces, indoors and outdoors, It provides superior performance in bonding tiles and similar coating materials.

APPLICATION
The application surface must be cleaned from dust, oil, paint and other chemicals and loose parts. Make sure that the ambient temperature is between +5 °C and +35 °C during application. Do not apply on surfaces that are frozen, melting or in danger of freezing within 24 hours. Do not apply under direct sun or strong wind.

Pour 25 kg. Fixser Flex Ceramic Adhesive Mortar into 5-6 liters of clean water and mix with a low speed mixer until a homogeneous mixture without lumps is obtained. Allow the mortar to rest for 5 minutes and mix again. Apply the mortar on the surface by pulling in one direction with a toothed steel trowel.

Trowel tooth size, It should be determined according to the size of the ceramic to be laid and the smoothness of the application surface. Ceramics are adhered to the mortar surface within 30 minutes. adhered to the mortar surface within 30 minutes. Force is applied with the help of a rubber hammer to ensure full contact of the mortar with the ceramic. Care should be taken to leave the desired joint spacing between the ceramics. Grouting can be started at least 48 hours after the bonding application.

WARNINGS
No material (lime, cement, gypsum, etc.) should be added to the prepared mortar. Expired mortars should not be mixed with water or dry mortar and used again. Do not apply on very hot or frozen surfaces exposed to the sun for a long time. Not applicable onwooden surfaces, metal surfaces, painted surfaces and surfaces exposed to moisture. Gypsum board, gypsum plaster, gypsum block etc. cannot be appliedon surfaces without using adherence enhancer primer. Do not go beyond the specified application surface and instructions for use.

STORAGE
Stack up to 10 layers in the original packaging, should be stored in a dry and moisture-free environment for 8 months. It is recommended to consume within 7 days after opening the bag.

HEALTH and SAFETY

Avoidskin and eye contact. Gloves must be worn during storage and application.